Description
Key Features:
- Exceeds EPA standards for potable water
- Includes automated filter maintenance
- Made for off-grid battery operation
- Processes 38 liters (10 Gallons) per minute
- Has an anticipated 5-7 year life (pending source water turbidity)
Uses
The BB600 functions exceptionally well for schools, clinics, churches, and community centers where people gather daily. It provides a viable business for someone desiring to bottle and sell safe drinking water. The system works well to filter most surface water systems (additional pre-filters may be required).
Water Purification
This filter system utilizes two 0.1 micron hollow-fiber membrane filters which remove all bacteria, protozoa, and cysts to 99.99999% (7 Log) and 99.1% (2 Log) of viruses. This point-of-use, clean water solution has a higher “log” rate than the EPA standard (6 Log) for potable water.
Power
The back-flush system is powered by a 12V battery which charges with either the included solar panel or the 1 Amp wall charger.
Usability
You can install the mounting plate on any flat surface; connect your incoming, clean and dirty water discharge lines, then filter your water.
Shipping Weight: 15kg (33 lbs) / Dimensions: W 76cm (30″) x H 71cm (18″) x D 30.5 cm (12″)
Maintenance
Hollow-fiber membrane filters require regular back-flushing to stay in good working order. The BB600 automatically back-flushes each filter with clean water from the other filter at preset intervals. This ensures optimal system performance for years to come and clean, safe drinking water 100% of the time.
The LED control panel continuously shows the system’s status, so you always know if a back-flush cycle is underway and the system is functioning normally.
The BlackBox Series filter systems do not remove dissolved solids, including chemicals and heavy metals. Therefore, we recommend using inline activated carbon pre-filtration, which significantly reduces the dissolved solids and chemicals, extending the life of the 0.1-micron filter set.